Сообщение

[Bowler CBT Labs] Bowler CBT Labs - Juniper Series 2 [2012, ENG]

Сообщение Солнышко » 26 фев 2017, 13:34

Bowler CBT Labs - Juniper Series 2

Год выпуска: 2012
Производитель: Bowler CBT Labs
Сайт производителя: http://www.bowlercbtlabs.com/
Автор: Steve Bowler
Продолжительность: 12:12:54
Тип раздаваемого материала: Видеоурок
Язык: Английский
Описание: Are you studying for Juniper Certifications? Are you just looking to brush up your skills on Juniper routers and looking for some good lab tutorial videos? Then these videos are for you. Over 1 Gig of Video Training in .MP4 file format presented on 1 DVD. 20 total videos and over 12 hours of High Quality in depth training based solely around Lab Tutorials in which we configure/troubleshoot and verify in a step-by-step easy to follow and understand method.

These labs are based strictly around configuring routers using the Juniper Command Line Interface (CLI) and are accompanied by easy to follow network topologies designed by myself. There are no “theory” based videos. Studies have proven that “hands on” training is the best and most efficient way to learn and that is strictly what I offer. So sit back, relax, start up your routers and prepare to join me and prepare yourself for hours upon hours of “hands on” training.
Готовитесь к сертификации Juniper? Или просто хотите освежить свои навыки работы с маршрутизаторами Juniper? Тогда этот курс для вас. Более гигабайта видео в формате MPEG4 представленного на одном DVD. 20 видео и около 12 часов высококачественного тренинга, основанного на лабораторных работах, в ходе которых, мы будем конфигурировать, отлаживать и проверять всё шаг за шагом.

Эти лабораторные основаны исключительно на конфигурировании роутеров через интерфейс командной строки и сопровождаются несложными, созданными мной, сетевыми топологиями. Тут нет основанных на теории видео. Исследования доказали, что практика это лучший и наиболее эффективный путь к изучению и это то, то я и предлагаю. Так что сядьте, расслабьтесь запустите свои маршрутизаторы, приготовьтесь присоединиться ко мне и приготовьтесь к часам обучения.
[*]
Introduction to Juniper Series 2
Total Runtime: 10 MinutesWelcome to Juniper Series 2!
The order of which to view the videos
Talk about the Juniper Networks Certification Program (JNCP)
[*]Junipers growing presence in the networking industryJuniper Border Gateway Protocol (BGP) Lab 3
Total Runtime: 36 MinutesThe basic principles of the Next Hop BGP attribute
How to setup Next Hop Self
Why you would use Next Hop Self
[*]Use show commands to verify proper Next Hop Self operationJuniper Border Gateway Protocol (BGP) Lab 4
Total Runtime: 27 MinutesThe basic principles of Route Reflectors
How to setup Route Reflectors
Why you would use Route Reflectors
[*]Use show commands to verify proper Route Reflector operationJuniper Border Gateway Protocol (BGP) Lab 5
Total Runtime: 42 MinutesThe basic principles of the AS Path BGP attribute
How to setup AS Path Prepending
Why you would use AS Path Prepending
[*]Use show commands to verify proper AS Path Prepending operationJuniper Border Gateway Protocol (BGP) Lab 6
Total Runtime: 35 MinutesThe basic principles of the Multi Exit Discriminator (MED) BGP attribute
How to setup the MED
Why you would use MED
[*]Use show command to verify proper MED operationJuniper Border Gateway Protocol (BGP) Lab 7
Total Runtime: 26 MinutesThe basic principles of the Local Preference BGP attribute
How to setup the Local Preference
Why you would use Local Preference
[*]Use show commands to verify proper local preference operationJuniper Border Gateway Protocol (BGP) Lab 8
Total Runtime: 42 MinutesThe basic principles of Multipath and Load Balancing
How to setup Multipath and Load Balancing
Why you would use Multipath and Load Balancing
[*]Use show commands to verify proper Multipath and Load Balancing operationJuniper IPv6 Lab 1
Total Runtime: 29 MinutesThe basic principles of IPv6 Static Routing
How to setup IPv6 Static Routing
Why you would use IPv6 Static Routing
[*]Use show commands to verify proper IPv6 Static Routing operationJuniper IPv6 Lab 2
Total Runtime: 39 MinutesRouting Information Protocol next generation (RIPng) Basics
How to setup RIPng
Why you would use RIPng
[*]Use show commands to verify proper RIPng operationJuniper IPv6 Lab 3
Total Runtime: 33 MinutesThe basic principles of OSPFv3
How to setup OSPFv3
Why you would use OSPFv3
[*]Use show commands to verify proper OSPFv3 operationJuniper Intermediate System to Intermediate System (IS-IS) Lab 1
Total Runtime: 48 MinutesThe basic principles of IS-IS
How to setup IS-IS
Why you would use IS-IS
[*]Use show commands to verify proper IS-IS operationJuniper Intermediate System to Intermediate System (IS-IS) Lab 2
Total Runtime: 46 MinutesThe basic principles of Multi Area IS-IS
How to setup Multi Area IS-IS
Why you would use Multi Area IS-IS
[*]Use show commands to verify proper Multi Area IS-IS operationJuniper Intermediate System to Intermediate System (IS-IS) Lab 3
Total Runtime: 33 MinutesThe basic principles of IS-IS Authentication
How to setup IS-IS Authentication
Why you would use IS-IS Authentication
[*]Use show commands to verify proper IS-IS Authentication operationJuniper Open Shortest Path First (OSPF) Lab 3
Total Runtime: 27 MinutesThe basic principles of OSPF Authentication
How to setup OSPF Authentication
Why you would use OSPF Authentication
[*]Use show commands to verify proper OSPF Authentication operationJuniper Open Shortest Path First (OSPF) Lab 4
Total Runtime: 30 MinutesThe basic principles of a Virtual Link
How to setup a Virtual Link
Why you would use Virtual Links
[*]Use show commands to verify proper Virtual Link operationJuniper Open Shortest Path First (OSPF) Lab 5
Total Runtime: 1 Hour and 3 MinutesThe basic principles of Stub Areas
How to setup a Stub Area
Why you would use a Stub Area
[*]Use show commands to verify proper Stub Area operationJuniper Open Shortest Path First (OSPF) Lab 6
Total Runtime: 59 MinutesThe basic principles of Not-So-Stubby Areas (NSSA)
How to setup an NSSA
Why you would use an NSSA
[*]Use show commands to verify proper NSSA operationJuniper Open Shortest Path First (OSPF) Lab 7
Total Runtime: 42 MinutesThe basic principles of Internal Route Summarization
How to setup Internal Route Summarization
Why you would use Internal Route Summarization
[*]Use show commands to verify proper Internal Route Summarization operationJuniper Open Shortest Path First (OSPF) Lab 8
Total Runtime: 36 MinutesThe basic principles of External Route Summarization
How to setup External Route Summarization
Why you would use External Route Summarization
[*]Use show commands to verify proper External Route Summarization operationJuniper Routing Information Protocol (RIPv2) Lab 2
Total Runtime: 37 MinutesThe basic principles of RIPv2 Authentication
How to setup RIPv2 Authentication
Why you would use RIPv2 Authentication
[*]Use show commands to verify proper RIPv2 Authentication
Файлы примеров: отсутствуют
Формат видео: MP4
Видео: AVC 1020x768 15fps 278 kbps
Аудио: AAC 44100Hz stereo 53kbps

Постеры

Соцсети

 

Статистика

Автор: Солнышко
Добавлен: 26 фев 2017, 13:34
Размер: 1.44 ГБ
Размер: 1 542 682 147 байт
Сидеров: 0
Личеров: 0
Скачали: 0
Здоровье: 0%
Скорость скачивания: 0 байт/сек
Скорость раздачи: 0 байт/сек
Последний сидер: Нет
Последний личер: Нет
Приватный: Нет (DHT включён)
Сеть и безопасность Скачать торрент
Скачать торрент
[ Размер 25.51 КБ / Просмотров 3 ]

Поделиться



  • Похожие торренты
    Ответы
    Просмотры
    Последнее сообщение

Вернуться в Сеть и безопасность